ProTech Bedliners FAQs
The ProLine is sprayed up to 1/8” thick on the floor of the bed. However, the strength of the lining is not determined by how thick the lining is sprayed, but by the hardness and durability of the product. ProTech Bedliners use the highest quality materials to give you maximum protection for your truck.
The time it takes to spray on the liner varies depending on the condition of the vehicle, how much preparation is needed and the humidity levels on the particular application day. For most truck applications, we advise that it usually takes around 4 hours to complete the whole process. Most people drop their trucks off in the morning and pick them up in the afternoon.
During the process of spraying the liner, the product dries within 10 seconds of each pass made. This is the chemical reaction that occurs by mixing the two chemicals at the right temperature. As a precaution, we advise that the product usually has a cure time of 24 hours before it can be put to full use. We usually tell people that it is safe to put light things in the back of the truck right after you leave, but don’t drag a refrigerator through it until tomorrow.
Yes! We advise you to either call us at (919) 855-0000 or stop by to set up an appointment so we can get you on our schedule.
ProTech Bedliners’ spray-in bedliners are meant to be a permanent application which gives your vehicle total protection, and we are sure you will never have the need to remove it. Although it may be possible to remove the liner, it would be very difficult.
Yes! ProTech Bedliners will not warp, crack, peel or split because of weather or other environmental factors. ProTech Bedliners work and look great in temperatures between -40 degrees F and 175 degrees F.
Our bedliner is made of a non-porous, hybrid polyurea lining called ProTech ProLine™. This coating is easy to clean and maintain so that your vehicle continues to look like new.
ProTech liners are designed for bare metal or previously painted surfaces. It’s also safe to be used on wood, concrete and metal surfaces. However, we warn against using it on surfaces that come directly in contact with heat or high temperatures such as mufflers, exhaust components and other high heat surfaces.
ProTech Bedliners’ sprayed-on truck linings outperform all plastic drop-in liners, rubber mats and paint-like coatings. Unlike other liners, ours are built to last. A non-skid surface keeps your load in place, preventing cracks, peels or splits. This protective surface also stops rust and corrosion so your truck will look like new.
To keep the lining clean, wash it as you would the rest of your vehicle, or just hose it out with water. Do not use silicon-based products on your lining, as they will reduce its skid resistance.